Menu
Cart

Not Sure What Harvester Model You Have?

Model #1501 has a couple easy to identify things...

  1. It has two blades. (One moving and one stationary.) 
  2. The universal drill mount is fairly complicated with u-bolts that loop around the drill to hold it in place.
  3. This is also the only model that had height adjustment skids. 

The model number is stamped into the back of the crank housing block as you can see in the picture below. 

 

Model #1502 is also easy to identify...

  1. It only has one blade.
  2. The drill is supported by clamping securely to the drive shaft. A velcro strap holds the drill to keep it from pivoting.

The model number is stamped into the upper drive shaft bearing mount as you can see in the picture below.

Model #1503 is very similar to model #1502, but it has one small difference... 

  1. On the bottom of the harvester we added a replaceable aluminum slide channel that is held on by two screws. Model #1502 did not have this and we had some problems with the frames wearing out too fast.

The model number is stamped into the upper drive shaft bearing mount as you can see in the picture below.

 

If you have any other questions please give us a call. 931-583-0397

USD